| Quantity: | |
|---|---|
In Line Brix Refractometer is a high-precision optical instrument that uses the principle of light refraction to achieve liquid refractive index/temperature/transmittance, which is suitable for online measurement of clear liquid concentration in the pipeline, and has been stable measurement in the process of "decolorization"/" filtrate ".
sapphire glass prism, unique V-shaped groove design, anti-corrosion and anti-fouling adhesion
The product is especially suitable for the detection of transparent or translucent liquids
Food and beverage production/biopharmaceutical/Environmental chemical/automotive maintenance
1. The detection "V-groove" must be completely and continuously covered by the liquid to ensure stable and reliable measurement.
2. The installation point of the product should choose the position where the temperature of the measured liquid is within the range of 5℃~80℃, in order to obtain the correct temperature measurement results.
3. As far as possible, avoid the temperature area that may have crystallization precipitation or hydrolysis, evaporation, etc., which will affect the measurement accuracy.
4. The installation point of the product should be selected where the measured liquid pressure is less than 1.0Mpa, which may cause product failure.
5. In pipe installation measurements, ensure that the direction of the "V-groove" measured by this product is consistent with the direction of the water flow.
In Line Brix Refractometer is a high-precision optical instrument that uses the principle of light refraction to achieve liquid refractive index/temperature/transmittance, which is suitable for online measurement of clear liquid concentration in the pipeline, and has been stable measurement in the process of "decolorization"/" filtrate ".
sapphire glass prism, unique V-shaped groove design, anti-corrosion and anti-fouling adhesion
The product is especially suitable for the detection of transparent or translucent liquids
Food and beverage production/biopharmaceutical/Environmental chemical/automotive maintenance
1. The detection "V-groove" must be completely and continuously covered by the liquid to ensure stable and reliable measurement.
2. The installation point of the product should choose the position where the temperature of the measured liquid is within the range of 5℃~80℃, in order to obtain the correct temperature measurement results.
3. As far as possible, avoid the temperature area that may have crystallization precipitation or hydrolysis, evaporation, etc., which will affect the measurement accuracy.
4. The installation point of the product should be selected where the measured liquid pressure is less than 1.0Mpa, which may cause product failure.
5. In pipe installation measurements, ensure that the direction of the "V-groove" measured by this product is consistent with the direction of the water flow.
